Swimming Pool Service & Pool Repair Southlake Texas TX - Claffey Pools
817-396-8542

Sign up now for the Equipment Pad Inspection & Heater Clean-Up to ensure your equipment is ready for busy season!

Service

  • Fully licensed by the Texas Department of Licensing and Regulations
  • Keeping your pool performing at its best
  • Use of industry-leading cleaning and chemical products

Swimming Pool Service Southlake, Texas TX

We take care of our customers and their pools far beyond the completion of installation. Should you need our assistance, we will send out one of our licensed service professionals to you as quickly as we can, to minimize your pool’s downtime.

Our service technicians are licensed by the Texas Department of Licensing and Regulations, so you can relax knowing that you’re in the care of professionals you can trust.

The services provided by our service department include:

  • Equipment installation and the repair of pumps, filters, heaters, pool lights and pool cleaners.
  • Installation and repair of automated controllers and ozone systems.
  • Nature2 products- Natural mineral purifiers for pools and spas, and in-line chlorinating feeders.
  • FMP Filter Maintenance Program- Hassle-free cleaning of your filter, salt cells, UV bulbs and Nature2 cartridge replacement.

Filter Maintenance Program:

  • DE – Every 6 months
  • Cartridge – Every 3 months
Let us take care of your pool

Pool Repair in Southlake, Texas

Not only do we ensure that your pool is performing at its best all year round, but the Claffey Pools team also provides a dedicated swimming pool repair service. 

If you notice any signs you need a pool repair, it’s vital that the issue is addressed as soon as possible in order to prevent further issues that could cause more damage and cost you more. 

Our numerous industry accreditations and licenses mean that we’re fully qualified to handle any pool repairs to the highest caliber, while minimizing disruption so you can get back to enjoying your personal backyard oasis. 

Our range of pool repair services in Southlake, Texas TX include:

  • Pool lighting repairs
  • Pool equipment repairs 
  • Swimming pool heat pump repairs 
  • Pool heater repairs
  • Pool pump repairs 
  • Pool leak repairs 
  • Pool filter repairs
  • And much more! 

For more information about our pool repairs and servicing, contact our expert team today.

What are you looking for?

FAQs

My pool or spa light stopped working
The first thing to check is the breaker/breakers associated to the lights. There could also be a GFCI type plug that may have been tripped. This is usually near the pool equipment. Reset if they tripped to the off position. If it does not reset or continues to happen often then we recommend submitting a service repair request
My spa keeps draining overnight
Since the spa water level is higher than the pool level, we install water check valves at the pool equipment to equalize the pressure and prevent the water spa water displacing to the pool when the pool equipment is off. These check valves are a maintenance item and should be inspected periodically and replaced if they start to fail.
My pool turns off every time we get a heavy rain
The pool pump motor has vent holes to prevent the motor from overheating. Sometimes the equipment area may be flooding, or the house gutters need to be cleaned so water from the roof gets displaced properly. Usually the breaker does what it is designed to do and trips to the off position. Once the moisture dissipates in the motor the breaker will be able to be reset and pump operates properly again. It is possible to purchase a motor cover at our retail store if it becomes a persistent problem.
How long should I be running my pool?
The type of main pump you have will be a primary factor on how long you should be circulating the main body of water. If you have a variable speed pump, we recommend running it 22 hours daily all year knowing the rpms are set to a moderate speed. If you have a single speed pump, we recommend running the pump at least 1 hour for every 10 degrees of air temperature. Therefore, adjust based on the average temperature as the seasons change.
The main pump is not priming
The primary cause for a pump not priming properly is air getting introduced to the suction side of the pool equipment. The most common reason is the pump lid. With the pool system turned off. Remove the pump lid, empty the strainer basket, inspect and lubricate the pump lid O-ring, pour approximately 5 gallons of water in pump strainer pot, secure the pump lid back to the pump, turn system on and let the pump self-prime for 10-15 minutes. If you are not successful and you know the pool water level is above the skimmers you will need to submit a service repair request.
My pool is not circulating
There are several factors that could be the cause. (1) The main pump has power but is not fully priming (2) The run schedule could have been changed (3) The breaker tripped and needs to be reset (4) Motor capacitor or motor has gone bad and requires replacement

Service Location & Hours

1625 Brumlow Avenue
Southlake
TX 76092

817-396-8542

Monday - Friday: 8:00 am - 5:00 pm

Saturday (April - August): 9:00 am - 1:00 pm

We're partnered with...

Let's discuss your project…

Call 817-488-5795

Or simply fill out our service request form

Start your journey

Visit us:

Top

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, assist in our marketing efforts, and for personalised advertising.

More Information Accept All Cookies