Adjust pH between 6.8 and 7.2 and allow free chlorine level to drop below 2.0 ppm, then add 2.5 lb per 20,000 concentrate product in areas where stains are most prevalent. Allow to circulate for 24 hours then readjust the pH to 7.4-7.6 and total alkalinity to 80 – 120 ppm ranges. Maintain normal sanitizer levels. Do not shock for at least 72 hours.
For maintenance and prevention of stains add Poolife Stain Stop once a month
Can be used with all chlorine, bromine, salt water, ozone and mineral based sanitizing systems
For removal of metallic stains including iron, copper, manganese
Lifts metallic stains cause from hard water, iron, copper and manganese
Call 817-488-5795
Or simply fill out our service request form
Start your journey1625 Brumlow Avenue
Southlake
TX 76092
Service: 817-421-0539
Retail: 817-416-0064
Main office: 817-488-5795
Residential Appliance Installation Contractor License: RAIC-385
Residential Appliance Installation Contractor License: RAIC-385